Workshop Worktops

AR-007.01 – Single Worktop Module

The worktop is made from 2 mm thick sheet metal folded four times and welded in the corners for additional reinforcement, with 2 omega bars along the entire length of the module. Easy to clean upper cover with DCT resistant to scratches, mineral oils, fuels, acids, etc. All the components are epoxy powder coated. Furthermore, there are pre-cuts in the short sides that can be easily opened during the installation phase in order to feed in oil pipes, electrical cables, water and air hoses, etc.

  • Epoxy powder coating.
  • Possible to feed cables and hoses for connecting to local systems.
  • Possible to install vice by bolting directly to work surface at every point.

AR-008.01 – Double Worktop Module

Double worktop module, to be applied above 2 DEA modules (90 or 110 series). The worktop is made from 2 mm thick sheet metal folded four times and welded in the corners for additional reinforcement, with 2 omega bars along the entire length of the module. Easy to clean upper cover with DCT resistant to scratches, mineral oils, fuels, acids, etc. All the components are epoxy powder coated. Furthermore, there are pre-cuts in the short sides that can be easily opened during the installation phase in order to feed in oil pipes, electrical cables, water and air hoses, etc.

  • Epoxy powder coating.
  • Possible to feed cables and hoses for connecting to local systems.
  • Possible to install vice by bolting directly to work surface at every point.

AR-009.01 – Triple Worktop Module

Triple worktop module, to be applied above 3 DEA modules (90 or 110 series). The worktop is made from 2 mm thick sheet metal folded four times and welded in the corners for additional reinforcement, with 2 omega bars along the entire length of the module. Easy to clean upper cover with DCT resistant to scratches, mineral oils, fuels, acids, etc. All the components are epoxy powder coated. Furthermore, there are pre-cuts in the short sides that can be easily opened during the installation phase in order to feed in oil pipes, electrical cables, water and air hoses, etc.

  • Epoxy powder coating.
  • Possible to feed cables and hoses for connecting to local systems.
  • Possible to install vice by bolting directly to work surface at every point.